This design is a solar panel that has more concentrated photons on a set of
standard solar cells approx 5” X 5” type and a system to cool those
panels.
Approx 2/3 less cells could be used in the same space to provide approx 1/2
cost savings for solar panels.
Multi layer solar cells are cost prohibitive and at this time are still only
produced for very large commercial systems.
This system can be certified by SRCC and FSEC and sold to all residential and
commercial customers.
As an example this system would use only 10 solar cells 5” X 5” in
a panel 15” X 50” where a standard panel would have used 30 solar
cells 5” X 5” in that same 15” X 50” area.
So the solar cells would need to produce more per cell and this is accomplished
by concentrating the photons and cooling the cells.
There are dozens of solar concentrators and this system is different because
it can cool the cells so they don't lose their ability to produce the full power.
If you concentrate the sun onto a cell it will heat and that increase in power
will be lost so how do we cool them so we can continue to see the power gain
with the sunlight gain?
That will be disclosed after purchase.
To give you an idea of the numbers, a 240 watt panel will have 60 cells and
each will max at 4 watts in standard full sun.
That same cell may produce 6 watts in concentrated sun but would lose most if
heated above the max temp.
Standard panels are approx 40” X 66” in size but a single Cooler Solar
panel would be 15” X 50”.
10 cells of a standard panel would produce 40 watts but
10 cells on our panel would produce maybe 60 watts.
60 standard cells come in at 240 watts but
60 of our cells could come in at 360 watts.
With our cooling design and concentrated sunlight we could possibly produce
50 percent more power overall.
Our panels are thicker and that may be a disadvantage for some consumers.
There are no photos with this design to show because it would allow other solar
engineers to redesign their own system for more power.
With any of my designs the new owner could purchase a design, work out the prototype
and patent the design. If they wanted to go into production I have already thought
that thru and the designs are kept simple enough that assembly and production
can be very easy.
So you don't want to go into production then just sell the completed design
and product for a huge profit.
Purchase this Solar Panel complete design with use and ownership rights for
$ 17,500 USD.
Purchase a prototype for this design for additional $2000 USD.
Don't even ask for disclosure before purchase. I will only explain basics before
purchase.
I have not public disclosed the details of this design so the new owner would
be able to patent as needed and would own the patents.
About the designer:
My name is Patrick Harris and I am Inventionaires. I have designed several different
type flight simulators, several different wind generators, Power harvesting
systems, solar electric systems, piezo generators, and many other products in
work covered by non-disclosure (not able to discuss).
I am currently working on 2 more power generation systems, another wind system,
a self charging battery and others.
Previously most of my work was custom design work for companies, and over the
years I developed many products I am now making available for purchase. Full
rights for use and production.
Other products I will offer for purchase include:
1. Modular Magnetic motor system designed for easy adding of modules for added
torque. Simple geared design with large moment arm for more torque. Could be
designed to run generator or other steady state needs. Purchase this design
for $ 37,000 USD with full ownership rights.
2. Wind system to Produce 20 KW @ 240 Vac. Full system design and spec's to
build production versions of my 20 KW system based on higher wind conditions.
This system will produce enough torque to run an 20 kw generator that can be
purchased from several different suppliers (info supplied). It can produce approx
30 Hp from wind speed of 15 mph and higher. Purchase this design for $ 16,500
USD with full ownership rights.
3. Small self contained Piezo generator that requires .3 amps @ 12 vdc and produces
80 vac to 120 vac and approx 4 to 5 amps. Can be ganged together for higher
output. Purchase this design for $18,500 USD with full ownership rights.
4. Single place flight sim with motion base and Virtual Visor video environment
fully interactive and small footprint. System could be patented and easily produced.
Purchase this design for $ 35,000 USD with full ownership rights.
5. Solar trailer mounted system for Mobile Electric Vehicle charging and or
promotion of solar charging of personal EV vehicles. Purchase this design for
$9,500 USD with full ownership rights.
Terms:
In order to offer designs with FULL use and production(ownership rights) I require
payment. If I had interested parties just sign a Non compete/disclosure statement
and then gave out information, the design would not be able to be patented and
the design would be stolen by someone.
After designing products for years, I can offer this guarantee. These designs
should work and they should work to in a production environment if the design
spec's and information is followed correctly. I also offer with each design
a service to help new owners either produce the prototypes themselves or I will
produce one for an added cost.
I will only discuss the basics prior to the purchase and then I will disclose
everything needed to build and test for each design.
I have been designing flight simulators and other products for years and have
worked for gov't contractors and other security clearance positions in aviation
and business. My company, Simworx LLC has been selling Motion Platforms ranging
from $30,000 to $150,000 and have many units operating around the globe.
Purchase this Solar Panel complete design with use and ownership rights for
$ 17,500 USD.
Purchase a prototype for this design for additional $2000 USD.
Don't even ask for disclosure before purchase. I will only explain basics before
purchase.
Disclosure: I am offering a design where you may be required to do future engineering work and future design work to bring the design to full production state. These designs are not completed working prototypes normally but from time to time may have a working prototype included. In most cases the pricing will come in much lower than if you had hired a engineering and consulting firm to bring the design to the stage offered here. In the interest of making these designs available with full ownership rights from me, I can not disclose information even if a non-disclosure agreement is signed. As with any invention or new products, there is a risk the invention may not work and several prototypes may be needed and major redesign may also be required. Purchase these designs with that in mind and take the risks yourself. History has shown that great rewards may require great risks.
Site Map: M-4
Motion Theater | SX-2 Flight Motion
Simulator | Custom Trailers |
Standard Concession Trailers | Custom Fencing
| Revenues | FAQ |
News | Feedback
| Films | Motion-Control-Systems
| Simulator | Photos
| Home| Free
Classified List
Copyright 2006 Simworx LLC all rights reserved.