Modular Piezo generator can produce 40 to 100 vac and amps from just .3 amps @ 12 vdc

This design produces an amount of AC voltage with an amount of amps from a modular designed piezo system. It requires at the most .3 amps @ 12 vdc to operate which can be from a battery charged by wind or solar.
As you can see it has the ability to add as many piezo elements as needed so a large number will produce a larger output staying within the bounds of the input of .3 amps @12 vdc.
Maximun number of piezo elements may be in the hundreds still operating in the input parameters suggested above.
I have left out the most important component of the system for very good reason. This design is almost too simple and I am amazed no one has built this before but they haven't.
The principles are centuries old and with advanced piezo elements it may become the standard for piezo generators.
It is NOT connected to a huge vibration source and the driving vibration force will surprise you with it simplicity.
It is built such that the vibrations in one area will feed to other areas in the tuning fork effect and it will add some resonance to the entire unit.
This design will not power your home but it will provide smaller amounts of power for smaller applications that need a stand alone power source.
The new owner will want to produce these in large quantities because they could be ganged together for even larger output. The only input source is the .3 amp 12 vdc source and that can be supplied by many different sources. It may also be possible to tweek the vibration source components to require even less input power.
Do some research on piezo and you will see they are soon to become a big influence in lower power generation. This design will have people saying why didn't I think of that.

The finished product would be housed in an enclosure and could be mounted horizontal or vertical as long as there were not major movement shocks. The piezos will need to vibrate consistently and outside movement forces may disturb the resonance.
With any of my designs the new owner could purchase a design, work out the prototype and patent the design. If they wanted to go into production I have already thought that thru and the designs are kept simple enough that assembly and production can be very easy.
So you don't want to go into production then just sell the completed design and product for a huge profit.
Purchase this Modular Piezo Generator complete design with use and ownership rights for $ 19,500 USD.
Purchase a prototype for this design for additional $5000 USD.
Don't even ask for disclosure before purchase. I will only explain basics before purchase.
I have not public disclosed the details of this design so the new owner would be able to patent as needed and would own the patents.

About the designer:
My name is Patrick Harris and I am Inventionaires. I have designed several different type flight simulators, several different wind generators, Power harvesting systems, solar electric systems, piezo generators, and many other products in work covered by non-disclosure (not able to discuss).
I am currently working on 2 more power generation systems, another wind system, a self charging battery and others.
Previously most of my work was custom design work for companies, and over the years I developed many products I am now making available for purchase. Full rights for use and production.
Other products I will offer for purchase include:
1. Modular Magnetic motor system designed for easy adding of modules for added torque. Simple geared design with large moment arm for more torque. Could be designed to run generator or other steady state needs. Purchase this design for $ 37,000 USD with full ownership rights.
2. Wind system to Produce 20 KW @ 240 Vac. Full system design and spec's to build production versions of my 20 KW system based on higher wind conditions. This system will produce enough torque to run an 20 kw generator that can be purchased from several different suppliers (info supplied). It can produce approx 30 Hp from wind speed of 15 mph and higher. Purchase this design for $ 16,500 USD with full ownership rights.
3. Solar panel design to increase power output from standard solar cells due to concentrated photon design and system to keep cells cooler. High temp is bad for standard cells but if kept cooler they can produce more power and the cost is much lower than multi layer cells. Easy to produce system. Purchase this design for $ 17,500 USD with full ownership rights.
4. Single place flight sim with motion base and Virtual Visor video environment fully interactive and small footprint. System could be patented and easily produced. Purchase this design for $ 35,000 USD with full ownership rights.
5. Solar trailer mounted system for Mobile Electric Vehicle charging and or promotion of solar charging of personal EV vehicles. Purchase this design for $9,500 USD with full ownership rights.

Terms:
In order to offer designs with FULL use and production(ownership rights) I require payment. If I had interested parties just sign a Non compete/disclosure statement and then gave out information, the design would not be able to be patented and the design would be stolen by someone.
After designing products for years, I can offer this guarantee. These designs should work and they should work to in a production environment if the design spec's and information is followed correctly. I also offer with each design a service to help new owners either produce the prototypes themselves or I will produce one for an added cost.
I will only discuss the basics prior to the purchase and then I will disclose everything needed to build and test for each design.
I have been designing flight simulators and other products for years and have worked for gov't contractors and other security clearance positions in aviation and business. My company, Simworx LLC has been selling Motion Platforms ranging from $30,000 to $150,000 and have many units operating around the globe.
Purchase this Modular Piezo Generator complete design with use and ownership rights for $ 19,500 USD.
Purchase a prototype for this design for additional $5000 USD.
Don't even ask for disclosure before purchase. I will only explain basics before purchase.

Disclosure: I am offering a design where you may be required to do future engineering work and future design work to bring the design to full production state. These designs are not completed working prototypes normally but from time to time may have a working prototype included. In most cases the pricing will come in much lower than if you had hired a engineering and consulting firm to bring the design to the stage offered here. In the interest of making these designs available with full ownership rights from me, I can not disclose information even if a non-disclosure agreement is signed. As with any invention or new products, there is a risk the invention may not work and several prototypes may be needed and major redesign may also be required. Purchase these designs with that in mind and take the risks yourself. History has shown that great rewards may require great risks.

Simworx LLC designs and builds custom simulator packages, and offers re-conditioned M-4 and SX-2 units both with or without trailers.
We offer the 2 seat SX-Interactive with 360° rotation. A Joystick/Throttle operated interactive Flight Simulator.
We have several motion base designs in single seat up to 8 seats that are available for custom production.
Partner with Simworx LLC for investment and production of your custom designed and custom branded simulator.
The M-4 and SX-2 simulators are currently operating in many countries. France, Austrailia, Panama, Canada, USA, UAE and Simworx LLC supports both parts and tech for many countries